5/1/2023 0 Comments Iron on vinyl![]() ![]() Once you have everything weeded, it is a great time to come over to your Easy Press and set it up. Sometimes the vinyl can be a little bit tricky but it’s awesome once you get the hang of it. If you are a first timer or a beginner, I highly recommend starting out with iron on. This will really help to secure your project. I love to weed on the mat, and I highly recommend you to try it! It’s so easy and I feel like once you weed on the mat, you know that you have the most control over your project. ![]() Once you remove the excess and save it for another project, you’re just going to grab your weeding tool and get to work! You will want to save all of this iron on for future projects so you don’t want to waste it. When you’re good to go, we’re going to go over to our machine and once you’ve applied your iron-on shiny side down onto the mat, you can go ahead and load it and hit that flashing Cricut button.įirst thing I like to do before I weed our cut image is to take our handy dandy Cricut knife and cut off all of the excess. One more important thing – we want to give this project a little more pressure so that it just cuts a little deeper and makes weeding that much simpler. Now we’re gonna hit “continue” and we’re going to select iron on. You need to lay iron on shiny side down on the mat so that when you cut it, it’s backwards. So, if you can see that shiny side there, that is our transfer paper. So now, we’re gonna hit “Make it” and since this is iron-on we’re going to choose “Iron on”. Make sure you size your own – don’t just take our word for it! Measure your own t-shirts just to make sure that it will be flawless. Today, ours is just 8 inches wide which is a perfect place to be. For t-shirts and things like that, I recommend for adult t-shirts no more than 9 inches wide. Let’s start! We are already in Design Space and we already sized our design. If you all want to see files like this plus so many more as well as a great selection of fonts, then please check our membership here. We used one of over 1,000+ cut files from Makers Gonna Learn – just click here to see the cut file we used for this project. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |